1 Attachment(s)
Setupbuilder 10 Set VAriable problem
Hi,
Im setting some varibles using Get after the user selects the intall
directory and they are not seen in the next Dialog.
Please see image
Directory select is in dialog 2
At the end I Get the values and set the variables and adding a message I
verify the get is OK USERSERIAL is readed ok!
But in the nex dialog (USer Info) the variable is shown blank.
What am I doing wrong?
Thanks
--
*Alberto Michelis*
ARMi software solutions www.armisoftware.com <http://www.armisoftware.com>
2 Attachment(s)
Re: Setupbuilder 10 Set VAriable problem
Alberto,
this is working as expected. See attached screemshots and the following
link:
http://www.lindersoft.com/projects/UserSN.zip
Hope this helps a bit.
Friedrich
Re: Setupbuilder 10 Set VAriable problem
Cant do it, it is not shown in the (USer Info) the variable is shown blank.
I had to delete the User info dialog and Use a Edit Data dialog.
There it works.
May be its related to the Load User info? I have it uncheked and
userserial is still blanked.
Regards
*Alberto Michelis*
ARMi software solutions www.armisoftware.com <http://www.armisoftware.com>
Re: Setupbuilder 10 Set VAriable problem
Hi Alberto,
> Cant do it, it is not shown in the (USer Info) the variable is shown
> blank.
> I had to delete the User info dialog and Use a Edit Data dialog.
> There it works.
> May be its related to the Load User info? I have it uncheked and
> userserial is still blanked.
So you compiled the project from my UserSN.zip and the serial number was
blank?
Friedrich