Clarion 9 Manager (Build 9.1.10655.1)

Clarion 9 Developers Only!

I have uploaded an updated "Clarion 9 Manager" (Build 9.1.10655.1) to detect
the status of your Clarion 9.0 and 9.1 environments.

This is a FREEWARE tool.

http://www.lindersoft.com/projects/C9_Manager.exe

How to interpret the reported values?

- Windows System Type

Displays the detected Windows operation system type (x86 or x64). Status is
"OK" if operation system type detection succeeded.

- Microsoft Visual C++ 2005 Redistributable

Displays the detected VC++2005 redistributable version. There are still
some Clarion developers who do not accept the offer to install the
"Microsoft Visual C++ 2005" and/or the "Microsoft Visual C++ 2008"
redistributables. Even if you already have a VC++2005 and/or VC++2008
component installed, your Clarion 9.x system needs a specific version! The
required VC++2005 libraries are not a core component of the Windows
operating system. Status is "OK" if the required VC++2005 redistributable
is installed.

- Microsoft Visual C++ 2008 Redistributable

Displays the detected VC++2008 redistributable version. The required
VC++2008 libraries are not a core component of the Windows operating system.
Status is "OK" if the required VC++2008 redistributable is installed.

- .NET Framework 2.0

Displays the detected .NET Framework 2.0 version. Status is "OK" if the
required .NET Framework is installed.

Note: The .NET Framework 2.0 is not a core component of the Windows 8.1
operating system. The Clarion installer can download and activate it for
you. Do NOT try to use your own .NET Framework 2.0 redistributables!

- Clarion 9.0

Displays the detected Clarion 9 build number. Status is "OK" if the Clarion
9.0 IDE is correctly installed. Status is "OK (UNREGISTERED)" if the
Clarion 9.0 IDE is correctly installed but the serial number has not been
verified yet. Start the IDE and enter your Name/Serial Number and press
"Validate" to register your product.

- Clarion 9.1

Displays the detected Clarion 9.1 build number. Status is "OK" if the
Clarion 9.1 IDE is correctly installed. Status is "OK (UNREGISTERED)" if
the Clarion 9.1 IDE is correctly installed but the serial number has not
been verified yet. Start the IDE and enter your Name/Serial Number and
press "Validate" to register your product.

- NOTES:

1. Clarion 9.0 reports "9.1.10638" and "FAILED!". That means, you have
installed the C9.1.10638 pre-release (ALPHA) over your existing C9.0
product. As a result, you have overwritten the C9.0 (Windows) registration
information.

2. Microsoft Visual C++ reports "0" and "FAILED!" but Clarion status is
"OK". You have skipped the VC++ installation step or you have uninstalled
the VC++ package.

Friedrich

--
Friedrich Linder
Lindersoft
www.lindersoft.com
+1.954.252.3910

--Helping You Build Better Installations
--SetupBuilder "point. click. ship"
--Create Windows 8 ready installations in minutes
--Official COMODO Code Signing and SSL Certificate Partner

Friedrich,

I am getting OK(UNREGISTERED) on Clarion 9. When I look at Help/About it
shows "This Product is Registered to: Bob Robesky". If the serial # has not
been validated, how do I go about validating it without wiping out all my
settings?

TIA

Bob

again a JP special ? <g>

sorry but mine shows all is fine except they are both (unregistered)

I am working in c9.1v9.0 right now and c9.0 opens perfectly well
without asking for registration

I HAD first pre 9.1 installed 'over' c9.0
I uninstalled it
I installed latest 9.1
......

SORRY.

--
JP
__________________________________________________ _____

For those who do not understand ... : "Qui bene amat bene castigat."
__________________________________________________ _____

DMC - Data Management Center : a tool to let you Migrate Import Export
Transfer your Data
www.dmc-fr.com

for info this is what my property.xml file has

<Properties name="SoftVelocity.Lic">
<Serial value="xxxxxxxxxxxxx" />
<Name value="JeanPierre Gutsatz" />
<ClarionSharpSerial value="" />
<Serial_9.1 value="xxxxxxxxxx" />
<ClarionSharpSerial_9.1 value="" />
</Properties>

IF you want me to "test" something for you ....

--
JP
__________________________________________________ _____

For those who do not understand ... : "Qui bene amat bene castigat."
__________________________________________________ _____

DMC - Data Management Center : a tool to let you Migrate Import Export
Transfer your Data
www.dmc-fr.com

Bob,

> I am getting OK(UNREGISTERED) on Clarion 9. When I look at Help/About it
> shows "This Product is Registered to: Bob Robesky". If the serial # has
> not been validated, how do I go about validating it without wiping out all
> my settings?

I think you have different user accounts on your UAC-aware machine and you
ran the Clarion install(s) and the Clarion 9 Manager tool from different
accounts or different execution levels.

You can right-click the old 9.1.10655.1 and select "Run as administrator" or
download the new 9.1.10655.2

http://www.lindersoft.com/projects/C9_Manager.exe

Does this work?

Friedrich

Hi JP,

I think you have different user accounts on your UAC-aware machine. Perhaps
an Administrator account and one or more Standard User accounts. Did you
run the Clarion install and the Clarion 9 Manager tool from different
accounts or different execution levels?

IMO, this is a perfect example for a situation where a non-elevated
application can't get access to the required information. The application
has to run elevated in this case. I have changed the permission level and
it requests administrator execution level privileges in Build 9.1.10655.2
now.

You can right-click the old 9.1.10655.1 and select "Run as administrator" or
download the new 9.1.10655.2

http://www.lindersoft.com/projects/C9_Manager.exe

This should work fine even on a multiple profiles machine.

Friedrich

Hi Fredrich,

Sorry but no different accounts here and all versions are always
installed from my main and only account 'administrator'

v2 gives the same results (unregistered)

BUT (maybe) UAC is turned OFF here in my dev machine

I'll restore it and retest to see if this changes results

--
JP
__________________________________________________ _____

For those who do not understand ... : "Qui bene amat bene castigat."
__________________________________________________ _____

DMC - Data Management Center : a tool to let you Migrate Import Export
Transfer your Data
www.dmc-fr.com

Hi JP,

> Sorry but no different accounts here and all versions are always installed
> from my main and only account 'administrator'
>
> v2 gives the same results (unregistered)
>
> BUT (maybe) UAC is turned OFF here in my dev machine
>
> I'll restore it and retest to see if this changes results

In theory, UAC on/off should not make a difference.

Clarion 'auto-detection' tries to access
CSIDL_APPDATA\SoftVelocity\Clarion\9.0\ClarionProp erties.xml. Do you see
your serial numbers for C9 and C9.1 in this file?

Friedrich

NO idea about this but yes the serials are in the ClarionProperties.xml
file as posted yesterday

ONE SEC

since I uninstalled and installed latest now I do have a 9.1 folder ???

C:\Users\Administrator\AppData\Roaming\SoftVelocit y\Clarion\9.0
This file has BOTH serials

<Properties name="SoftVelocity.Lic">
<Serial value="xxxxxxxxxxxxxxxxx" />
<Name value="JeanPierre Gutsatz" />
<ClarionSharpSerial value="" />
<Serial_9.1 value="xxxxxxxxxxxxxxxxxx" />
<ClarionSharpSerial_9.1 value="" />
</Properties>

no
9.1 is for the topscan.ini file ONLY

> CSIDL_APPDATA

--
JP
__________________________________________________ _____

For those who do not understand ... : "Qui bene amat bene castigat."
__________________________________________________ _____

DMC - Data Management Center : a tool to let you Migrate Import Export
Transfer your Data
www.dmc-fr.com

Hi JP,

I'll send a private Clarion 9 Manager executable with a debug message box to
display some more information. I have tested it with UAC enabled/disabled
and on different user accounts (Administrator/Standard User) and it always
accessed the correct .xml file here.

Friedrich

Hi JP,

Definitely not your machine. It's the size of your ClarionProperties.xml.
The buffer size in the SB Clarion 'auto-detection' feature is too small
:-( and it does not read enough information from the file.

Friedrich

glad to have helped trace a glitch

many addins
many layout specials
many options and settings changed here

make indeed a 54kb properties xml file ....

good catch my friend!

--
JP
__________________________________________________ _____

For those who do not understand ... : "Qui bene amat bene castigat."
__________________________________________________ _____

DMC - Data Management Center : a tool to let you Migrate Import Export
Transfer your Data
www.dmc-fr.com

:-)

New dynamic memory allocation added to "Clarion 9 Manager" Build
9.1.10655.3:

http://www.lindersoft.com/projects/C9_Manager.exe

This should fix it for ClarionProperties.xml configuration files larger than
10KB.

BTW, if a 3rd-party developer makes use of the "check for registered IDE"
functionality in SB, please drop me a quick note because you need an updated
SetupBuilder 8.1 compiler. Otherwise, you'll see something similar to the
attached screenshot on machines with ClarionProperties.xml files larger than
10KB.

Friedrich

Yes, this verion works.

Thanks,

Bob

>
> Yes, this verion works.
>

Perfect, thanks Bob!

Friedrich

Oops, sorry, version .3 works.

Bob Robesky

> BTW, if a 3rd-party developer makes use of the "check for registered
> IDE" functionality in SB, please drop me a quick note because you
> need an updated SetupBuilder 8.1 compiler.

*** CLARION 3rd-party developers only (ClarionProperties.xml configuration
file fix) ***

http://www.lindersoft.com/sb8/sb81_4314_Dev.exe

SetupBuilder Support
www.setupbuilder.com